RX3 3000 Jumbo Rack

The RX3 Jumbo Rack 2' Depth 8' Width offers a complete gym setup with a half rack, 2x cable towers spaced enough apart for cable crossovers, and built-in storage options all in one space-saving unit. If you looked at our RX3 freestanding rack 3000 option and wanted something with a bit more stretch for cable crossovers, the ability to have more than 1 person using the half rack and cable towers at the same time, or you wanted to be able to use the squat rack without needing to adjust various attachments you might have placed on the cable towers, then this is for you.

There's a lot of reasons why our RX3 series should be your top choice:

1. The 3000 series cable towers on the left and right sides offer the ability to do both 2:1 and 1:1 weight ratios. The 2:1 weight ratios are the most commonly used, suitable for dynamic and more functional movements where you want a lower starting weight of 10LBs and the ability to increase weight in 5LB increments. You generally want to work your way up to heavier weights by increasing in 5LB increments for exercises such as chest fly, face pulls, and basically anything else where you use 1 hand or 1 leg. Jumping in 10LB increments might be too heavy for most movements and cause you to break proper form. On the other hand, the dual 200LB weight stacks can be utilized to their full 200LBs by changing to 1:1 weight ratio. Exercises such as lat pulldowns and low rows may need weight in excess of 100LBs and the ability to utilize the 200LB weight stacks to actually feel like 200LBs comes in handy by the 3000 cable towers ability to change to 1:1 weight ratio.
2. The configuration of our jumbo rack allows you to use a flat bench, incline bench, or decline bench off of the front uprights of the half rack. You will have ample space to put your bench into the rack area, regardless if you have storage shelves installed in the center or not.
3. The distance from back uprights to front uprights for the 2x 3000 cable towers and the half rack are exactly the same. This is the most optimal design for space efficiency and allows cable crossover movements without the need to fold your half rack. Simply stand in front of the half rack and be in perfect position to utilize both cable towers for any cable crossover movement. This would also allow greater attachment options in the future as you'd be able to utilize attachments that span in between 2 uprights by using the half rack upright and the 3000 cable tower 3000 upright.
4. The footprint of this jumbo rack is one of the smallest, while still delivering all the functionality of others. At only 105 inches (8'9") long x 31 inches (2'7") deep, you get everything you need in a more space-efficient footprint.
5. We also offer unparalled quality and attention to detail throughout the RX3 series. The uprights where the trolley slides are done in chrome to reduce friction, reduce wear and tear from the trolley and aluminum pop pin, and more rust resistant. Our attachment pins such as j-cups and spotter arms also feature a rounded chrome pin that eliminates powder coat chipping from the pin and the upright. We're only using high-quality aluminum pulleys throughout, and include black anodized aluminum handles with the 3000 cable towers. All hardware is black e-coat which looks super sleek and is more scratch and corrosion resistant.

The jumbo rack does not need to be bolted into the ground, but we always recommend doing so for additional safety and liability.

This unit is 3"x3" with 1" holes and 2" spacing, so there's are a wide variety of attachments from us and others available for this specification. We recommend using the following attachments: spotter arms, lat pull down seat, adjustable foot plate, FT Cable Output Adapter.

For storage options built into the rack, we recommend:
- up to 8x plate sleeves
- up to 4 total shelves consisting of either RX3 43" Plate and Ball Shelf or RX3 43" Kettlebell and Dumbell Shelf.

Our design team meets biweekly and are currently working on a broad range of attachments which will be addedhereas we develop more and more.

You can utilize ourWeight Stack Plate Load Pin, a 2.5LB attachment that inserts into the weight stack and allows you to increase weight by 2.5LBs (with 1:1 weight ratio) or 1.25LBs (with 2:1 weight ratio) as well as add more weight to the 200LB stack.

There's an option to adjust to our shorter, 86" Rack model by checking the box above the Add To Cart button if your ceiling is lower than 94". If your ceiling is greater than 94", we always recommend fitting the tallest rack available that your ceiling can allow. The pull-up bar can be adjusted downwards anywhere along the upright if you want to have more clearance for your head when doing pullups.